CLIENTS

ABOUT US

PRODUCTS

QUALITY

TECHNICAL

Products

Stainless Steel	Copper Alloy	Brass Alloy	Aluminium	Alloy Steel
Inconel Alloy	Nickel Alloy	Monel Alloy	En Series	Carbon Steel

TECHNICAL INFO

Back

Stainless Steel

Specifications

Stainless Steel specifications held in the austenitic, martensitic and precipitation hardening varieties. Stocks are held in British Standard and International standards. Below is listed our most commonly supplied grades; please contact our sales office.
Also stock is 301 stainless spring temper rolled strip.

17/4PH	17% chromium, 4% nickel. A precipitation hardening stainless with high strength and hardness, excellent corrosion resistance and easy heat treatment.
UNS S31803	A high strength duplex stainless steel
UNS S32760	A super duplex grade which offers enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types
FV520B	FV520B is a precipitation hardening stainless steel with excellent antigalling characteristics.
303	18% chromium, 9% nickel free machining stainless. It offers good corrosion resistance with better machinability.
304	18% chromium, 9% nickel stainless. Good all-round austenitic grade for general purpose corrosion resistant applications.
310	25% chromium, 20% nickel stainless. A heat resisting stainless with good resistance to scaling at high temperatures.
316	18% chromium, 11% nickel, 2½% molybdenum stainless. The molybdenum content enables high resistance to corrosion.
321	18% chromium, 10% nickel stainless. Similar to 304 but titanium stabilized, which offers improved welding properties.
410	General purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required.
416	13% chromium, free machining stainless. Usually supplied ready heat treated and offering excellent machining properties.
420	13% chromium stainless steel which will achieve a high hardness. It gives a good polish and is resistant to attack from corrosive plastics.
431	17% chromium, 2½% nickel stainless. Supplied heat treated with a high tensile strength.
440B	A high carbon martensitic stainless with moderate corrosion resistance good strength and the ability to obtain and keep excellent hardness (Rc 58) and wear resistance.
440C	With an slightly increased carbon content it achieves a higher hardness than 440B stainless specification.

Available forms:

round bar steel tube steel square bar flat br steel block billet steel sheet steel hexagon

PRODUCTS

REQUEST QUOTE

CONTACT