1.2510

 1.2510 is an oil hardening tool steel which hardens at a relatively low temperature with
 minimum distortion.

1.2379

 1.2379 is a werkstoff tool steel giving a good hardness with added toughness. This steel
 can be vacuum hardened when minimum distortion is required.

1.2080

 1.2080 werkstoff tool steel has a high carbon, high chromium content which attains a high 
 hardness  giving good abrasion resistance.

1.2436

1.2363

 1.2363 is an air hardening wekstoff tool steel. It characteristics are its high abrasion
 resistance with good toughness.

1.2344

 1.2344 is a hot work tool steel. This Werkstoff tool steel is air hardening with very little distortion. 

1.2550

 1.2550 is a tough and shock resisting Werkstoff tool steel, with good abrasion resistance. When 
 hardened 1.2550 tool steel has a good cutting ability with great toughness

1.2311

 1.2311 is a pre-hardened high tensile steel which is readily machineable. Also available with a
 higher sulpher content as Werkstoff grade 1.2312.

1.2767

 1.2767 is a 4 1/4% nickel steel, which achieves a good through hardness. 1.2767 is capable of 
 taking a good polish and is commonly used as a plastic mould steel.

1.3343

 1.3343 is a Werkstoff grade high speed steel, which offers good wear resistance with superior
 toughness and machineability.

1.2083

 1.2083 is a Werkstoff 13% chromium stainless plastic mould steel which will achieve a high
 hardness. It gives a good polish and is resistant to attack from corrosive plastics.

1.2842